Above Ground Pool Liners

15' Round Boulder Swirl Overlap Aboveground Swimming Pool Liner 25 Mil

15' Round Boulder Swirl Overlap Aboveground Swimming Pool Liner 25 Mil

15' Round Boulder Swirl Overlap Aboveground Swimming Pool Liner 25 Mil

15' Round Boulder Swirl Overlap. Aboveground Swimming Pool Liner 25 Mil. At SOPS, our Aboveground Pool Liners are made from the finest 100% virgin vinyl, and will stand up to years of wear & weather. The overlap liner is the most common type of aboveground pool liner.

Your liner simply folds over the corrugated metal wall and drapes down on the outside of the wall. It is held in place by plastic coping strips (Not included). Will work with either 48" or 52" Constant Depth (Flat Bottom) swimming pool. Will not work in expandable swimming pool.

Don't see your size liner, Give SOPS a call! Once the liner has been taken out of the box, the liner is not returnable. Please make sure you measure your pool before purchasing the liner. Don't forget about purchasing happy pool bottom, wall foam and pool cove. The Most Advanced Processing High Temperature Curing, Computer controlled process insures that 100% of the material is "Vulcanized" to the highest possible tolerances.

Vacuum Sealing, high volume air pumps combined with electronic air filters remove all impurities before bonding. High Pressure Heat Bonding, computer balanced combination of high pressure and exact temperatures insures a void-free permanent bond.

State of the Art Seaming The most technically advanced radio frequency R. Vinyl welding reduces the chance of cold spots in seaming process. Lap welded seams, unlike butt welded seams, reduce both lateral and vertical tension. Quality Control Inspectors, inspect every liner during the welding process. Reduced Wrinkling - Hand folded flat to reduce wrinkles, unlike automated packers that twist and force the liner into the box which can cause permanent creasing.

How To Measure For A Liner. In your aboveground pool measuring your pool for a new liner is a simple process. On a round pool you simply get a measuring tape and take 2 measurements. Go from inside the pool at the bottom of the wall and measure directly across to the other side at the same height. Do this in two locations in the pool so you get the same measurement.

We like to measure at the bottom of the wall in case the wall is not plumb from side to side. The wall at the bottom track location is your safest bet. On an oval pool you do the same thing as a round except that you do it in the middle of the pool from side to side and at the ends at the longest point from end to end. All measurements are from inside the pool touching the wall at the base.

Most liners are for 48" or 52" sidewall pools. Our manufacturers also make provisions for the dirt, sand, wedge, or pool cove that is needed at the base perimeter inside the pool. If your pool has water in it measure out at least 2 ft. From the sidewall with a measuring tape to the point at the top of the wall or where the liner is attached. Bear in mind that most round liners are made to be flat bottom and not a deeper middle.

If your pool has a deeper area please contact one of our representatives to discuss. Some liners are what we call overlap.

This type is the most common and simply folds over the corrugated metal wall and drapes down on the outside of the wall. The liner is held in place by plastic coping strips. You may wish to replace these if your old ones are brittle and dry.

Beaded liners have a thick-formed extrusion at the top that hooks into a female receptor around the top of the pool wall on the waterside. Some brands of pools use a special bead that we can make for you as a special order. Most pools can utilize the standard bead that is common in the industry. Better to be safe than sorry.

Incidentally, you can change your overlap liner to accept a beaded liner by simply adding bead receiver strips to the order. This way, if you need to change the liner in the future, you do not have to remove the top seats of the pool. This is a real timesaver and is much easier to reinstall liners. J-Hook & V-Bead are liner types that have a thicker open flap top that inserts over the corrugated metal wall.

It looks likes the plastic coping we use to hold an overlap liner over the metal wall except that, in this case, it is attached to the top of the liner. If you are using an overlap liner and your pool is a flat-bottom, you can use the V-Hook or the J-Hook type liner. Note: This information is intended to answer many questions you may have regarding the type and size liner you may need. We're happy to help! We are unable to make changes or cancellations to orders after they are placed.

We do not offer local pickups. Oversized deliveries are curbside only with FREE Lift Gate Service. If the combined weight of your order is 500 lbs.

TO RETURN MERCHANDISE PLEASE FOLLOW THESE INSTRUCTIONS. Any item(s) received after 30 days will be denied and sent back to the customer at their expense. Not all items may be returnable.

For example: Chemicals, Custom/Special Orders, Unfolded Covers, Opened Aboveground Liners, Drilled Solar Reels and Custom Commercial Furniture are all non-returnable. After 15 days all manufacturers warranties apply. Deliveries should be inspected and any visible damage should be notated prior to accepting the package. All damage claims must be submitted within 7 days of receipt by the customer, or a claim cannot be submitted.

Insure the package for its full value. The item "15' Round Boulder Swirl Overlap Aboveground Swimming Pool Liner 25 Mil" is in sale since Wednesday, March 22, 2017. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Liners".

The seller is "saveonpoolsupplies" and is located in United States. This item can be shipped to United States.

  • Brand: Swimline
  • MPN: LI1548BSO25
  • Item Condition: NEW


15' Round Boulder Swirl Overlap Aboveground Swimming Pool Liner 25 Mil