Above Ground Pool Liners

Full Swirl Above Ground Overlap Pool Liner 48/52 H, 25 Gauge Various Sizes

Full Swirl Above Ground Overlap Pool Liner 48/52 H, 25 Gauge Various Sizes

Full Swirl Above Ground Overlap Pool Liner 48/52 H, 25 Gauge Various Sizes

Our liners have been vulcanized, high-pressure heat bonded and vacuum sealed. Material has been RF vinyl welded with lap welded seams. Durable liners free of impurities.

20 Gauge = 20 Years. 25 Gauge = 25 Years. 30 Gauge = 30 Years. The Full Swirl pattern provides your pool with the peaceful visage of neverending water.

The North American cut material is hand-folded to prevent permanent creasing and excess wrinkling. Before installing, lay the liner out in the sun for a minimum of one hour to warm up the vinyl ensuring it is able to stretch when adding water. The best temperatures to install would be between 70-80 degrees. Overlap liners are designed to fold over the top of your pool wall and do not require a bead receiver. Overlap liners are held in place with coping. Whether installing for the first time, or replacing an existing liner, the Full Swirl pattern offers durability while not breaking the bank.

Pool height is determined by measuring the outside wall from the ground to underneath the top rail. Round pool size is determined by measuring from the center point wall to wall in order to obtain the diameter.

Overlap liners are draped over the walls of the pool during the installation process. Once the bottom seam is even near the cove, the liner is ready to be secured.

This material is held in place through the use of coping strips prior to putting the top rails back onto the pool. Bead receivers are not needed for this type of liner. The liner is made to work with pools which have a flat bottom and wall heights of 48 or 52. Will not work with Intex or Pop-Up pools Made from 100% virgin vinyl, these liners are computer cut and the seams are lap welded for a flawless fit and finish. The Lamiclear technology provides years of protection against abrasion, chemicals and UV fading. This is result of the use of three layers including: An acrylic top coat, UV resistant print layer and the virgin vinyl base layer. The item "Full Swirl Above Ground Overlap Pool Liner 48/52 H, 25 Gauge Various Sizes" is in sale since Monday, May 4, 2020. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Liners".

The seller is "usapoolsuperstore" and is located in Churchville, New York. This item can be shipped to United States.

  • MPN: Does Not Apply
  • Brand: GLI


Full Swirl Above Ground Overlap Pool Liner 48/52 H, 25 Gauge Various Sizes